Creating a Model Truss Bridge with AI

We would like to get 3D printer design for a modelTrussBridge

We want a design combining a Warren truss pattern on the side with an X Pattern on the top and bottom of the bridge.

We will use the nicescad webinterface to OpenScad for our design and Claude AI as the AI chat tool.

First we need a list of prompts that will lead to a proper scad module.

Steps

Step 1: Create beamAt Module

Prompt: Create an OpenSCAD module named beamAt that places a cube beam at a specified 3D position, applies a 3D rotation, and uses given dimensions. Add an example usage rotating the beam 45 degrees around the Z-axis. Add a header comment with a link to https://wiki.bitplan.com/index.php/Creating_a_Model_Truss_Bridget_with_AI and // Copyright Wolfgang Fahl with current iso date

// nicescad truss bridge example
// see https://wiki.bitplan.com/index.php/Creating_a_Model_Truss_Bridget_with_AI
// Copyright Wolfgang Fahl 2025-06-14
// Prompt: "Create an OpenSCAD module named beamAt that places a cube beam at a specified 3D position, applies a 3D rotation, and uses given dimensions. Add an example usage rotating the beam 45 degrees around the Z-axis. Add a header comment with a link to https://wiki.bitplan.com/index.php/Creating_a_Model_Truss_Bridget_with_AI and // Copyright Wolfgang Fahl with current iso date"
module beamAt(position, rotation, dimensions) {
  translate(position)
    rotate(rotation)
      cube(dimensions);
}

// example usage
beamAt([10, 5, 0], [0, 0, 45], [40, 3, 3]);  // beam at position, rotated 45° on Z-axis

Example answer by Deepseek

References

HAER-Truss-Poster

see HISTORIC AMERICAN EINGINEERIING RECORD