OctoPrint
Jump to navigation
Jump to search
Installation on existing raspbian
Installation from source
see the five steps described in the "Installing from source" section of
Installing Python2.7 including pip and virtual env
python --version
Python 2.7.13
pip install virtualenv
Collecting virtualenv
Downloading https://files.pythonhosted.org/packages/7e/1b/6c00d57127608793e16e8b7f813e64d58a1938505c42fe190d1386ab41e1/virtualenv-16.4.0-py2.py3-none-any.whl (2.0MB)
100% |████████████████████████████████| 2.0MB 134kB/s
Installing collected packages: virtualenv
Successfully installed virtualenv-16.4.0
virtualenv will not be available via command line at this point so the instructions from the forum article will provide virtualenv.
sudo apt install python-pip python-dev python-setuptools python-virtualenv git libyaml-dev build-essential
Obtaining the octoprint source
git clone https://github.com/foosel/OctoPrint.git
Creating a virtual environment
wf@pito:~/source/python/OctoPrint $ virtualenv venv
Running virtualenv with interpreter /usr/bin/python2
New python executable in /home/wf/source/python/OctoPrint/venv/bin/python2
Also creating executable in /home/wf/source/python/OctoPrint/venv/bin/python
Installing setuptools, pkg_resources, pip, wheel...done.
Installing OctoPrint into that virtual environment
wf@pito:~/source/python/OctoPrint $ ./venv/bin/python setup.py install
running install
running bdist_egg
running egg_info
creating src/OctoPrint.egg-info
...
Adding pytz 2018.9 to easy-install.pth file
Installed /home/wf/source/python/OctoPrint/venv/lib/python2.7/site-packages/pytz-2018.9-py2.7.egg
Finished processing dependencies for OctoPrint==1.3.10
Start OctoPrint Server
./venv/bin/octoprint serve
Finish Install via Webbrowser
Octoprint listens on port 5000 by default:
http://<octoprintserver>:5000/
Will bring up the Setup Wizard
CuraEngine
sudo apt-get -y install gcc-4.7 g++-4.7
git clone -b legacy https://github.com/Ultimaker/CuraEngine.git
cd CuraEngine
make
Webcam
see .g.
- https://plastikjunkies.de/raspberry-octoprint-webcam/4/
- https://community.octoprint.org/t/available-mjpg-streamer-configuration-options/1106
MJpegStreamer
sudo apt-get install libjpeg8-dev imagemagick libav-tools cmake
git clone https://github.com/jacksonliam/mjpg-streamer.git
cd mjpg-streamer/mjpg-streamer-experimental
make