Creating a Model Truss Bridge with AI

We would like to get 3D printer design for a modelTrussBridge

We want a design combining a Warren truss pattern on the side with an X Pattern on the top and bottom of the bridge.

We will use the nicescad webinterface to OpenScad for our design and Claude AI as the AI chat tool.

First we need a list of prompts that will lead to a proper scad module.

Steps

Step 1: Create beamAt Module

Prompt: Create a beamAt module that positions and rotates a cube beam at any location with any orientation. Give an example

module beamAt(position, rotation, dimensions) {
  translate(position) {
  rotate(rotation) {
  cube(dimensions);
}
beamAt([10, 5, 0], [0, 0, 45], [40, 3, 3]);  // beam at position, rotated 45° on Z-axis

References

HAER-Truss-Poster

see HAER