Difference between revisions of "Broom Handle Extension DIY"

From BITPlan Wiki
Jump to navigation Jump to search
Line 11: Line 11:
 
[[File:SAM_0722.JPG|400px]]
 
[[File:SAM_0722.JPG|400px]]
 
= Steps =
 
= Steps =
1. Cut the shrink tube to fit [[File:SAM_0723.JPG|400px]]
+
# Cut the shrink tube to fit [[File:SAM_0723.JPG|400px]]
2. Pull the shrink tube over perforated steel tape and heat with a lighter to shrink it
+
# Pull the shrink tube over perforated steel tape and heat with a lighter to shrink it
  
 
= Links =
 
= Links =
 
* https://www.amazon.com/3pc-Hardwood-Extension-Pole-Handle/dp/B00NO402UW
 
* https://www.amazon.com/3pc-Hardwood-Extension-Pole-Handle/dp/B00NO402UW
 
* https://thelinkssite.com/2018/02/27/easy-broom-handle-extension-diy/
 
* https://thelinkssite.com/2018/02/27/easy-broom-handle-extension-diy/

Revision as of 07:10, 23 February 2021

Problem

You need to connect to broom handles. For example a telescope and a regular one to extend from 4.5 m to some 6m. SAM 0731.JPG SAM 0732.JPG

Parts List

  1. 2 x Perforated Steel tape 150mm x 17 mm (8 holes > 6mm)
  2. 2 x Allen Screw 6 x 40 mm
  3. 2 x Wingnut 6 mm
  4. 2 x Shrink Tubing 20 mm x 140 mm
  5. 1 x Allen Key 4 mm

SAM 0722.JPG

Steps

  1. Cut the shrink tube to fit SAM 0723.JPG
  2. Pull the shrink tube over perforated steel tape and heat with a lighter to shrink it

Links