4 Day Requirements Engineering (CPRE-FL) course by BITPlan[edit]

upcoming CPRE-FL dates[edit]

The following seminars for the topic Certified Professional for Requirements Engineering / Foundation Level will be held in the near future:

Language	Topic	From	Until	City	Trainer

We recommend our UML Introduction the day before every training.
We also offer courses in German language!

Overview of training couse[edit]

• In four days you achieve two aims:
  • To master the content of the course for a successful examination
  • and to gain knowledge of software architecture for your day-to-day practice
• Through the practical exercises you will get a feeling for Requirements Engineering
• On the last training course day the CPRE-FL examination takes place.

Objectives[edit]

1. Defining of the system and system context
2. Determination of requirements
3. Documentation of requirements
4. Natural language documentation of requirements
5. Model driven requirements documentation
6. Checking and coordination of requirements
7. Management of requirements
8. Tool support

Here you can find the recent curriculum from IREB.

Description[edit]

The program “Certified Professional for Requirements Engineering” consists of several modules. The first module is offered by BITplan as a 4 Day training Course followed by an examination. In the foundation level training course model independent and interdisciplinary foundations of requirments engineering are taught. Thereby we are not limited to the hard facts but also take soft factors e.g. the defining of the “right” stakeholders into consideration. The training course teaches the importance of the process that is essential for the realisation of a software product or software system. Requirements can be distinguished from wishes. They are recorded and documentated as specifications. The training course finishes with a final examination of 75 minutes. If you pass the examination you are awarded the certificate for the qualification “Certified Professional for Requirements Engineering” Foundation Level.

Pre-requisite Experience[edit]

Basic knowledge of UML (Unified Modeling Language) are required. If necessary they can be refreshed with a UML-day.
UML Introduction

Target audience[edit]

Target audience are advanced persons and beginners in the requirements engineering. Everybody with high standards of quality and professionalism should attend this training course. It is suitable for business analysts, requirements managers, project managers, consultants as well as for software and system developers.

Your benefits[edit]

ProfiWiki with networked learning content, quizzes and glossary Interactive Teaching and Active Participation Ring binder with commented course material (colour print) Certificate of attendance Registration for the CPRE-FL exam upon request Lunch Coffee, tea and cold drinks Cookies, cake, fruit and vegetable snacks

Travel and accommodation are not included. We are pleased helping you to plan your journey and your stay.

References[edit]

BITPlan trained the 4 best German CPREs. March 2015: The FUTURE NETWORK CERT honored the top 20 participants of requirements engineering. " The training has encouraged me that the way I record requirements is right. The knowledge helps me a lot. Maybe I will now pay more attention to the traceability of requirements. " Lutz Leitner Aventon Technology

or Registration by Fax(german)

Prices[edit]

Prices excl. VAT

Examination[edit]

Duration: 75 minutes with 45 multiple-choice questions

Here you can find the recent examination regulation from IREB.

Your coaches[edit]

Wolfgang Fahl[edit]

Wolfgang Fahl is founder and owner of BITPlan GmbH, Germany. He teaches Softwarearchitecture but is also involved with commercial and open source software development projects a lot.
BITPlan is not a pure training company.
For more than 25 years Mr. Fahl has been developing software in a wide range of industries. This is his strength in the training business.
Through his many years of practical experience, he helps you to find personal examples that make the content of the curriculum tangible and comprehensible.

This is also supported by a variety of training formats, e.g. a practical exercise that leads through the seminar.

Dr. Oskar von Dungern[edit]

Frank Hoffmann[edit]

Your contact person - also for Inhouse Trainings[edit]

Do you have any further questions or particular wishes ?

We offer exclusive training courses for your organisation on your own premises. You are kindly invited to discuss dates, training language (German or English) and conditions with us.

The contact person for training courses is Maria Fahl.

Overview of training couse[edit]

• In four days you achieve two aims:
  • To master the content of the course for a successful examination
  • and to gain knowledge of software architecture for your day-to-day practice
• Through the practical exercises you will get a feeling for Requirements Engineering
• On the last training course day the CPRE-FL examination takes place.

Objectives[edit]

1. Defining of the system and system context
2. Determination of requirements
3. Documentation of requirements
4. Natural language documentation of requirements
5. Model driven requirements documentation
6. Checking and coordination of requirements
7. Management of requirements
8. Tool support

Here you can find the recent curriculum from IREB.

Description[edit]

The program “Certified Professional for Requirements Engineering” consists of several modules. The first module is offered by BITplan as a 4 Day training Course followed by an examination. In the foundation level training course model independent and interdisciplinary foundations of requirments engineering are taught. Thereby we are not limited to the hard facts but also take soft factors e.g. the defining of the “right” stakeholders into consideration. The training course teaches the importance of the process that is essential for the realisation of a software product or software system. Requirements can be distinguished from wishes. They are recorded and documentated as specifications. The training course finishes with a final examination of 75 minutes. If you pass the examination you are awarded the certificate for the qualification “Certified Professional for Requirements Engineering” Foundation Level.

Pre-requisite Experience[edit]

Basic knowledge of UML (Unified Modeling Language) are required. If necessary they can be refreshed with a UML-day.
UML Introduction

Target audience[edit]

Target audience are advanced persons and beginners in the requirements engineering. Everybody with high standards of quality and professionalism should attend this training course. It is suitable for business analysts, requirements managers, project managers, consultants as well as for software and system developers.

Your benefits[edit]

ProfiWiki with networked learning content, quizzes and glossary Interactive Teaching and Active Participation Ring binder with commented course material (colour print) Certificate of attendance Registration for the CPRE-FL exam upon request Lunch Coffee, tea and cold drinks Cookies, cake, fruit and vegetable snacks

Travel and accommodation are not included. We are pleased helping you to plan your journey and your stay.

References[edit]

BITPlan trained the 4 best German CPREs. March 2015: The FUTURE NETWORK CERT honored the top 20 participants of requirements engineering. " The training has encouraged me that the way I record requirements is right. The knowledge helps me a lot. Maybe I will now pay more attention to the traceability of requirements. " Lutz Leitner Aventon Technology

or Registration by Fax(german)

Prices[edit]

Prices excl. VAT

Examination[edit]

Duration: 75 minutes with 45 multiple-choice questions

Here you can find the recent examination regulation from IREB.

Your coaches[edit]

Wolfgang Fahl[edit]

Wolfgang Fahl is founder and owner of BITPlan GmbH, Germany. He teaches Softwarearchitecture but is also involved with commercial and open source software development projects a lot.
BITPlan is not a pure training company.
For more than 25 years Mr. Fahl has been developing software in a wide range of industries. This is his strength in the training business.
Through his many years of practical experience, he helps you to find personal examples that make the content of the curriculum tangible and comprehensible.

This is also supported by a variety of training formats, e.g. a practical exercise that leads through the seminar.

Dr. Oskar von Dungern[edit]

Frank Hoffmann[edit]

Your contact person - also for Inhouse Trainings[edit]

Do you have any further questions or particular wishes ?

We offer exclusive training courses for your organisation on your own premises. You are kindly invited to discuss dates, training language (German or English) and conditions with us.

The contact person for training courses is Maria Fahl.

4 Day Requirements Engineering (CPRE-FL) course by BITPlan[edit]

upcoming CPRE-FL dates[edit]

The following seminars for the topic Certified Professional for Requirements Engineering / Foundation Level will be held in the near future:

Language	Topic	From	Until	City	Trainer

We recommend our UML Introduction the day before every training.
We also offer courses in German language!

Overview of training couse[edit]

• In four days you achieve two aims:
  • To master the content of the course for a successful examination
  • and to gain knowledge of software architecture for your day-to-day practice
• Through the practical exercises you will get a feeling for Requirements Engineering
• On the last training course day the CPRE-FL examination takes place.

Objectives[edit]

1. Defining of the system and system context
2. Determination of requirements
3. Documentation of requirements
4. Natural language documentation of requirements
5. Model driven requirements documentation
6. Checking and coordination of requirements
7. Management of requirements
8. Tool support

Here you can find the recent curriculum from IREB.

Description[edit]

The program “Certified Professional for Requirements Engineering” consists of several modules. The first module is offered by BITplan as a 4 Day training Course followed by an examination. In the foundation level training course model independent and interdisciplinary foundations of requirments engineering are taught. Thereby we are not limited to the hard facts but also take soft factors e.g. the defining of the “right” stakeholders into consideration. The training course teaches the importance of the process that is essential for the realisation of a software product or software system. Requirements can be distinguished from wishes. They are recorded and documentated as specifications. The training course finishes with a final examination of 75 minutes. If you pass the examination you are awarded the certificate for the qualification “Certified Professional for Requirements Engineering” Foundation Level.

Pre-requisite Experience[edit]

Basic knowledge of UML (Unified Modeling Language) are required. If necessary they can be refreshed with a UML-day.
UML Introduction

Target audience[edit]

Target audience are advanced persons and beginners in the requirements engineering. Everybody with high standards of quality and professionalism should attend this training course. It is suitable for business analysts, requirements managers, project managers, consultants as well as for software and system developers.

Your benefits[edit]

ProfiWiki with networked learning content, quizzes and glossary Interactive Teaching and Active Participation Ring binder with commented course material (colour print) Certificate of attendance Registration for the CPRE-FL exam upon request Lunch Coffee, tea and cold drinks Cookies, cake, fruit and vegetable snacks

Travel and accommodation are not included. We are pleased helping you to plan your journey and your stay.

References[edit]

BITPlan trained the 4 best German CPREs. March 2015: The FUTURE NETWORK CERT honored the top 20 participants of requirements engineering. " The training has encouraged me that the way I record requirements is right. The knowledge helps me a lot. Maybe I will now pay more attention to the traceability of requirements. " Lutz Leitner Aventon Technology

or Registration by Fax(german)

Prices[edit]

Prices excl. VAT

Examination[edit]

Duration: 75 minutes with 45 multiple-choice questions

Here you can find the recent examination regulation from IREB.

Your coaches[edit]

Wolfgang Fahl[edit]

Wolfgang Fahl is founder and owner of BITPlan GmbH, Germany. He teaches Softwarearchitecture but is also involved with commercial and open source software development projects a lot.
BITPlan is not a pure training company.
For more than 25 years Mr. Fahl has been developing software in a wide range of industries. This is his strength in the training business.
Through his many years of practical experience, he helps you to find personal examples that make the content of the curriculum tangible and comprehensible.

This is also supported by a variety of training formats, e.g. a practical exercise that leads through the seminar.

Dr. Oskar von Dungern[edit]

Frank Hoffmann[edit]

Your contact person - also for Inhouse Trainings[edit]

Do you have any further questions or particular wishes ?

We offer exclusive training courses for your organisation on your own premises. You are kindly invited to discuss dates, training language (German or English) and conditions with us.

The contact person for training courses is Maria Fahl.

4 Day Requirements Engineering (CPRE-FL) course by BITPlan[edit]

upcoming CPRE-FL dates[edit]

The following seminars for the topic Certified Professional for Requirements Engineering / Foundation Level will be held in the near future:

Language	Topic	From	Until	City	Trainer

We recommend our UML Introduction the day before every training.
We also offer courses in German language!

Overview of training couse[edit]

• In four days you achieve two aims:
  • To master the content of the course for a successful examination
  • and to gain knowledge of software architecture for your day-to-day practice
• Through the practical exercises you will get a feeling for Requirements Engineering
• On the last training course day the CPRE-FL examination takes place.

Objectives[edit]

1. Defining of the system and system context
2. Determination of requirements
3. Documentation of requirements
4. Natural language documentation of requirements
5. Model driven requirements documentation
6. Checking and coordination of requirements
7. Management of requirements
8. Tool support

Here you can find the recent curriculum from IREB.

Description[edit]

The program “Certified Professional for Requirements Engineering” consists of several modules. The first module is offered by BITplan as a 4 Day training Course followed by an examination. In the foundation level training course model independent and interdisciplinary foundations of requirments engineering are taught. Thereby we are not limited to the hard facts but also take soft factors e.g. the defining of the “right” stakeholders into consideration. The training course teaches the importance of the process that is essential for the realisation of a software product or software system. Requirements can be distinguished from wishes. They are recorded and documentated as specifications. The training course finishes with a final examination of 75 minutes. If you pass the examination you are awarded the certificate for the qualification “Certified Professional for Requirements Engineering” Foundation Level.

Pre-requisite Experience[edit]

Basic knowledge of UML (Unified Modeling Language) are required. If necessary they can be refreshed with a UML-day.
UML Introduction

Target audience[edit]

Target audience are advanced persons and beginners in the requirements engineering. Everybody with high standards of quality and professionalism should attend this training course. It is suitable for business analysts, requirements managers, project managers, consultants as well as for software and system developers.

Your benefits[edit]

ProfiWiki with networked learning content, quizzes and glossary Interactive Teaching and Active Participation Ring binder with commented course material (colour print) Certificate of attendance Registration for the CPRE-FL exam upon request Lunch Coffee, tea and cold drinks Cookies, cake, fruit and vegetable snacks

Travel and accommodation are not included. We are pleased helping you to plan your journey and your stay.

References[edit]

BITPlan trained the 4 best German CPREs. March 2015: The FUTURE NETWORK CERT honored the top 20 participants of requirements engineering. " The training has encouraged me that the way I record requirements is right. The knowledge helps me a lot. Maybe I will now pay more attention to the traceability of requirements. " Lutz Leitner Aventon Technology

or Registration by Fax(german)

Prices[edit]

Prices excl. VAT

Examination[edit]

Duration: 75 minutes with 45 multiple-choice questions

Here you can find the recent examination regulation from IREB.

Your coaches[edit]

Wolfgang Fahl[edit]

Wolfgang Fahl is founder and owner of BITPlan GmbH, Germany. He teaches Softwarearchitecture but is also involved with commercial and open source software development projects a lot.
BITPlan is not a pure training company.
For more than 25 years Mr. Fahl has been developing software in a wide range of industries. This is his strength in the training business.
Through his many years of practical experience, he helps you to find personal examples that make the content of the curriculum tangible and comprehensible.

This is also supported by a variety of training formats, e.g. a practical exercise that leads through the seminar.

Dr. Oskar von Dungern[edit]

Frank Hoffmann[edit]

Your contact person - also for Inhouse Trainings[edit]

Do you have any further questions or particular wishes ?

We offer exclusive training courses for your organisation on your own premises. You are kindly invited to discuss dates, training language (German or English) and conditions with us.

The contact person for training courses is Maria Fahl.

4 Day Requirements Engineering (CPRE-FL) course by BITPlan[edit]

upcoming CPRE-FL dates[edit]

The following seminars for the topic Certified Professional for Requirements Engineering / Foundation Level will be held in the near future:

Language	Topic	From	Until	City	Trainer

We recommend our UML Introduction the day before every training.
We also offer courses in German language!

Overview of training couse[edit]

• In four days you achieve two aims:
  • To master the content of the course for a successful examination
  • and to gain knowledge of software architecture for your day-to-day practice
• Through the practical exercises you will get a feeling for Requirements Engineering
• On the last training course day the CPRE-FL examination takes place.

Objectives[edit]

1. Defining of the system and system context
2. Determination of requirements
3. Documentation of requirements
4. Natural language documentation of requirements
5. Model driven requirements documentation
6. Checking and coordination of requirements
7. Management of requirements
8. Tool support

Here you can find the recent curriculum from IREB.

Description[edit]

The program “Certified Professional for Requirements Engineering” consists of several modules. The first module is offered by BITplan as a 4 Day training Course followed by an examination. In the foundation level training course model independent and interdisciplinary foundations of requirments engineering are taught. Thereby we are not limited to the hard facts but also take soft factors e.g. the defining of the “right” stakeholders into consideration. The training course teaches the importance of the process that is essential for the realisation of a software product or software system. Requirements can be distinguished from wishes. They are recorded and documentated as specifications. The training course finishes with a final examination of 75 minutes. If you pass the examination you are awarded the certificate for the qualification “Certified Professional for Requirements Engineering” Foundation Level.

Pre-requisite Experience[edit]

Basic knowledge of UML (Unified Modeling Language) are required. If necessary they can be refreshed with a UML-day.
UML Introduction

Target audience[edit]

Target audience are advanced persons and beginners in the requirements engineering. Everybody with high standards of quality and professionalism should attend this training course. It is suitable for business analysts, requirements managers, project managers, consultants as well as for software and system developers.

Your benefits[edit]

ProfiWiki with networked learning content, quizzes and glossary Interactive Teaching and Active Participation Ring binder with commented course material (colour print) Certificate of attendance Registration for the CPRE-FL exam upon request Lunch Coffee, tea and cold drinks Cookies, cake, fruit and vegetable snacks

Travel and accommodation are not included. We are pleased helping you to plan your journey and your stay.

References[edit]

BITPlan trained the 4 best German CPREs. March 2015: The FUTURE NETWORK CERT honored the top 20 participants of requirements engineering. " The training has encouraged me that the way I record requirements is right. The knowledge helps me a lot. Maybe I will now pay more attention to the traceability of requirements. " Lutz Leitner Aventon Technology

or Registration by Fax(german)

Prices[edit]

Prices excl. VAT

Examination[edit]

Duration: 75 minutes with 45 multiple-choice questions

Here you can find the recent examination regulation from IREB.

Your coaches[edit]

Wolfgang Fahl[edit]

Wolfgang Fahl is founder and owner of BITPlan GmbH, Germany. He teaches Softwarearchitecture but is also involved with commercial and open source software development projects a lot.
BITPlan is not a pure training company.
For more than 25 years Mr. Fahl has been developing software in a wide range of industries. This is his strength in the training business.
Through his many years of practical experience, he helps you to find personal examples that make the content of the curriculum tangible and comprehensible.

This is also supported by a variety of training formats, e.g. a practical exercise that leads through the seminar.

Dr. Oskar von Dungern[edit]

Frank Hoffmann[edit]

Your contact person - also for Inhouse Trainings[edit]

Do you have any further questions or particular wishes ?

We offer exclusive training courses for your organisation on your own premises. You are kindly invited to discuss dates, training language (German or English) and conditions with us.

The contact person for training courses is Maria Fahl.

4 Day Requirements Engineering (CPRE-FL) course by BITPlan[edit]

upcoming CPRE-FL dates[edit]

The following seminars for the topic Certified Professional for Requirements Engineering / Foundation Level will be held in the near future:

Language	Topic	From	Until	City	Trainer

We recommend our UML Introduction the day before every training.
We also offer courses in German language!

Overview of training couse[edit]

• In four days you achieve two aims:
  • To master the content of the course for a successful examination
  • and to gain knowledge of software architecture for your day-to-day practice
• Through the practical exercises you will get a feeling for Requirements Engineering
• On the last training course day the CPRE-FL examination takes place.

Objectives[edit]

1. Defining of the system and system context
2. Determination of requirements
3. Documentation of requirements
4. Natural language documentation of requirements
5. Model driven requirements documentation
6. Checking and coordination of requirements
7. Management of requirements
8. Tool support

Here you can find the recent curriculum from IREB.

Description[edit]

The program “Certified Professional for Requirements Engineering” consists of several modules. The first module is offered by BITplan as a 4 Day training Course followed by an examination. In the foundation level training course model independent and interdisciplinary foundations of requirments engineering are taught. Thereby we are not limited to the hard facts but also take soft factors e.g. the defining of the “right” stakeholders into consideration. The training course teaches the importance of the process that is essential for the realisation of a software product or software system. Requirements can be distinguished from wishes. They are recorded and documentated as specifications. The training course finishes with a final examination of 75 minutes. If you pass the examination you are awarded the certificate for the qualification “Certified Professional for Requirements Engineering” Foundation Level.

Pre-requisite Experience[edit]

Basic knowledge of UML (Unified Modeling Language) are required. If necessary they can be refreshed with a UML-day.
UML Introduction

Target audience[edit]

Target audience are advanced persons and beginners in the requirements engineering. Everybody with high standards of quality and professionalism should attend this training course. It is suitable for business analysts, requirements managers, project managers, consultants as well as for software and system developers.

Your benefits[edit]

ProfiWiki with networked learning content, quizzes and glossary Interactive Teaching and Active Participation Ring binder with commented course material (colour print) Certificate of attendance Registration for the CPRE-FL exam upon request Lunch Coffee, tea and cold drinks Cookies, cake, fruit and vegetable snacks

Travel and accommodation are not included. We are pleased helping you to plan your journey and your stay.

References[edit]

BITPlan trained the 4 best German CPREs. March 2015: The FUTURE NETWORK CERT honored the top 20 participants of requirements engineering. " The training has encouraged me that the way I record requirements is right. The knowledge helps me a lot. Maybe I will now pay more attention to the traceability of requirements. " Lutz Leitner Aventon Technology

or Registration by Fax(german)

Prices[edit]

Prices excl. VAT

Examination[edit]

Duration: 75 minutes with 45 multiple-choice questions

Here you can find the recent examination regulation from IREB.

Your coaches[edit]

Wolfgang Fahl[edit]

Wolfgang Fahl is founder and owner of BITPlan GmbH, Germany. He teaches Softwarearchitecture but is also involved with commercial and open source software development projects a lot.
BITPlan is not a pure training company.
For more than 25 years Mr. Fahl has been developing software in a wide range of industries. This is his strength in the training business.
Through his many years of practical experience, he helps you to find personal examples that make the content of the curriculum tangible and comprehensible.

This is also supported by a variety of training formats, e.g. a practical exercise that leads through the seminar.

Dr. Oskar von Dungern[edit]

Frank Hoffmann[edit]

Your contact person - also for Inhouse Trainings[edit]

Do you have any further questions or particular wishes ?

We offer exclusive training courses for your organisation on your own premises. You are kindly invited to discuss dates, training language (German or English) and conditions with us.

The contact person for training courses is Maria Fahl.