Broom Handle Extension DIY

Problem

You need to connect two broom handles. For example a telescope and a regular one to extend from 4.5 m to some 6m.

Parts List

1. 2 x Perforated Steel tape 150mm x 17 mm (8 holes > 6mm)
2. 2 x Allen Screw 6 x 40 mm
3. 2 x Wingnut 6 mm
4. 2 x Shrink Tubing 20 mm x 140 mm
5. 1 x Allen Key 4 mm

Steps

1. Cut the shrink tube to fit
2. Pull the shrink tube over perforated steel tape and heat with a lighter to shrink it
3. Bend the steel tape and connect ends with the Allen Screw using the Wing Nut and the Allen Key
4. Create a connection between the two handles at two points where you tie together the parts with the perforated steel tape

Links

• https://www.amazon.com/3pc-Hardwood-Extension-Pole-Handle/dp/B00NO402UW
• https://thelinkssite.com/2018/02/27/easy-broom-handle-extension-diy/