Difference between revisions of "Broom Handle Extension DIY"
Jump to navigation
Jump to search
| Line 4: | Line 4: | ||
[[File:SAM_0732.JPG|400px]] | [[File:SAM_0732.JPG|400px]] | ||
= Parts List = | = Parts List = | ||
| + | # 2 x Perforated Steel tape 150mm x 17 mm (8 holes > 6mm) | ||
| + | # 2 x Allen Screw 6 x 40 mm | ||
| + | # 2 x Wingnut 6 mm | ||
| + | # 2 x Shrink Tubing 20 mm x 140 mm | ||
| + | # 1 x Allen Key 4 mm | ||
[[File:SAM_0722.JPG|400px]] | [[File:SAM_0722.JPG|400px]] | ||
| + | = Steps = | ||
| + | Cut the shrink tube to fit | ||
| + | |||
= Steps = | = Steps = | ||
[[File:SAM_0723.JPG|400px]] | [[File:SAM_0723.JPG|400px]] | ||
Revision as of 08:08, 23 February 2021
Problem
You need to connect to broom handles. For example a telescope and a regular one to extend from 4.5 m to some 6m.
Parts List
- 2 x Perforated Steel tape 150mm x 17 mm (8 holes > 6mm)
- 2 x Allen Screw 6 x 40 mm
- 2 x Wingnut 6 mm
- 2 x Shrink Tubing 20 mm x 140 mm
- 1 x Allen Key 4 mm
Steps
Cut the shrink tube to fit
Steps
